Unless you live on a deserted island, you have probably already heard about the new SawStop Crosscut Table. Of course if you live there you are probably not seeing this either!


I received my store demo a couple of weeks ago and was blown away by the design and quality of it. Installation was simple. The hardest part was having to remove the fence rails, as they need to be cut down a bit. This is a pretty simple process, but does take some time. If you can’t cut the rails yourself, any metal working shop should be able to take care of that for you. Other than that, it is a simple matter of removing the left cast iron wing and replacing it with the new table with the four bolts that held the wing. Using the standard mounting you will have a full 48″ crosscut capacity. If you prefer, you can move the sled forward so that it is not in your way using the saw normally. You will loose about a foot in crosscut capacity, but could be a good compromise.


With the fully adjustable fence, cut any angle up to 60 degrees with ease. Two flip stops come standard, so repeat cuts are a breeze!

Due to high demand, it can take awhile to get yours so consider ordering now. I love mine and know you will too.

Work safe and be Happy!